Chrysler > 300C > 2007

2007 Chrysler 300C Seating Capacity

How many passengers does a 2007 Chrysler 300C hold?

Shop for Products at Amazon



2007 Chrysler 300C Trims

Base 4dr Rear-wheel Drive Sedan

Front seat type - no data

Car seats are divided into 4 main categories, depending on their application and the type of vehicle: regular standard car seats, racing car seats, ultra comfort seats and sports seats.

Standard seating - 5

It is the same for all trims.

The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.

Front driver seat direction controls - no data

A set of controls that allow the driver to adjust the seat according to his preferences: the height, tilt angle, position of the headrest, etc.

Front passenger seat direction controls - no data

This is a set of levers and buttons that allow the passenger to adjust the parameters of the seat, such as height, tilt angle, lumbar support, and the height of the headrests.

Lumbar support - no data

This characteristic is used in the manufacture of car seats, designed to help both drivers and passengers while sitting in car seats. These can be safety cages, additional cushions designed to provide lumbar support.

Front armrests - no data

Armrest - a special surface , which is near the driver, where you can put your hand.

Front head restraints - no data

Head restraints are automotive safety features attached to or built into the top of each seat to restrict rearward movement of an adult passenger's head, thereby preventing or mitigating neck injuries in case of a collision.

Heated front seats - no data

The system is a special electrical device that is built into the front seats and powered from the car's onboard network. The device allows you to manually set the comfort temperature of the seats - you can increase or decrease it, depending on your preference.

Memory - no data

The vehicles now have many types of distributed memory in the vehicle – SRAM, DRAM, ROM, FLASH and, in some vehicles, tests of MRAM.

Rear seats - no data

Car seats are divided into 4 main categories, depending on their application and the type of vehicle: regular standard car seats, racing car seats, ultra comfort seats and sports seats.

Rear armrest - no data

This device is often located in the middle of the back row of seats. It is a drop-down area on which passengers can place their hands. In some vehicle configurations, you can put drinks or other necessities there.

Rear head restraints - no data

Head restraints are a car safety feature attached to or built into the top of each seat. The main purpose of this device is to limit the rearward movement of the adult passenger's head during a collision. They help to avoid multiple neck and head injuries.

Seat trim - no data

This is the material used in making your seat covers.

3rd row seats - no data

This feature is an additional row of seats, which is located behind the main two. By default, they are hidden under the floor of the car in the trunk, not taking up much space. If necessary, these seats are folded out, providing space for three more passengers, but depriving the car of the ability to carry any cargo in its trunk.

3rd row fold into floor - no data

This feature is an additional row of seats, which is located behind the main two. By default, they are hidden under the floor of the car in the trunk, not taking up much space. If necessary, these seats are folded out, providing space for three more passengers, but depriving the car of the ability to carry any cargo in its trunk.

Heated rear seats - no data

The system is a special electrical device that is built into the rear seats and powered from the car's onboard network. The device allows you to manually set the comfort temperature of the rear seats.

Cooled front seats - no data

It is a ventilation system that allows you to manually change the temperature of the front seats. This device is a set of fans, hidden inside the seats, used to recirculate the air.

Cooled rear seats - no data

It is a ventilation system that allows you to manually change the temperature of the rear seats. This device is a set of fans, hidden inside the seat, used to recirculate the air.

Fold flat front passenger seat - no data

This is a feature when the passenger seat folds forward 90 degrees to form a flat surface, like a table. Flat-folding versions usually have a large plastic panel on the back of the seat.

SRT8 4dr Rear-wheel Drive Sedan

Base 4dr All-wheel Drive Sedan

Determining 2007 Chrysler 300C maximum seating capacity

The seating capacity of the 2007 Chrysler 300C is the overall variety of passengers it might bring, comprising the driver. Generally, a number of people can rest in the sedan automobile easily: two on the front and 2 – on the back row. Nevertheless, the backseat is meant for three passengers, the seat at the center matches tiny individuals at most. But would it be ok to operate a vehicle when men and women or youngsters take a seat on other passengers' laps inside 2007 Chrysler 300C?

You must recognize that the volume of basic safety straps is formed by the quantity of passengers that could legally sit down inside a automobile. And in accordance with the US regulations, every passenger should be buckled up when heading in the car otherwise, you may get a ticket. Also, it is required that all seat bealts to be functional, as in some states, you can even get yourself a increased fine for defective belts – to prevent bogus claims. For example, you don't fasten your 2007 Chrysler 300C belt since you are reluctant to do that, and all of a sudden a police officer stops you. You say you were not buckled for the reason that strap is not working correctly – prepare yourself to be fined.

LEGAL NOTICE

Legally, a Chrysler 300C with five seat belts can only hold five passengers

Chrysler 300C of another year

Select the year