Audi > RS 4 > 2007

2007 Audi RS 4 Seating Capacity

How many passengers does a 2007 Audi RS 4 hold?

Shop for Products at Amazon



2007 Audi RS 4 Trims

4.2L 4dr All-wheel Drive quattro Sedan

Front seat type - no data

Car seats are divided into 4 main categories, depending on their application and the type of vehicle: regular standard car seats, racing car seats, ultra comfort seats and sports seats.

Standard seating - 5
?

It is the same for all trims.

The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.

Front driver seat direction controls - no data

A set of controls that allow the driver to adjust the seat according to his preferences: the height, tilt angle, position of the headrest, etc.

Front passenger seat direction controls - no data

This is a set of levers and buttons that allow the passenger to adjust the parameters of the seat, such as height, tilt angle, lumbar support, and the height of the headrests.

Lumbar support - no data

This characteristic is used in the manufacture of car seats, designed to help both drivers and passengers while sitting in car seats. These can be safety cages, additional cushions designed to provide lumbar support.

Front armrests - no data

Armrest - a special surface , which is near the driver, where you can put your hand.

Front head restraints - no data

Head restraints are automotive safety features attached to or built into the top of each seat to restrict rearward movement of an adult passenger's head, thereby preventing or mitigating neck injuries in case of a collision.

Heated front seats - no data

The system is a special electrical device that is built into the front seats and powered from the car's onboard network. The device allows you to manually set the comfort temperature of the seats - you can increase or decrease it, depending on your preference.

Memory - no data

The vehicles now have many types of distributed memory in the vehicle – SRAM, DRAM, ROM, FLASH and, in some vehicles, tests of MRAM.

Rear seats - no data

Car seats are divided into 4 main categories, depending on their application and the type of vehicle: regular standard car seats, racing car seats, ultra comfort seats and sports seats.

Rear armrest - no data

This device is often located in the middle of the back row of seats. It is a drop-down area on which passengers can place their hands. In some vehicle configurations, you can put drinks or other necessities there.

Rear head restraints - no data

Head restraints are a car safety feature attached to or built into the top of each seat. The main purpose of this device is to limit the rearward movement of the adult passenger's head during a collision. They help to avoid multiple neck and head injuries.

Seat trim - no data

This is the material used in making your seat covers.

3rd row seats - no data

This feature is an additional row of seats, which is located behind the main two. By default, they are hidden under the floor of the car in the trunk, not taking up much space. If necessary, these seats are folded out, providing space for three more passengers, but depriving the car of the ability to carry any cargo in its trunk.

3rd row fold into floor - no data

This feature is an additional row of seats, which is located behind the main two. By default, they are hidden under the floor of the car in the trunk, not taking up much space. If necessary, these seats are folded out, providing space for three more passengers, but depriving the car of the ability to carry any cargo in its trunk.

Heated rear seats - no data

The system is a special electrical device that is built into the rear seats and powered from the car's onboard network. The device allows you to manually set the comfort temperature of the rear seats.

Cooled front seats - no data

It is a ventilation system that allows you to manually change the temperature of the front seats. This device is a set of fans, hidden inside the seats, used to recirculate the air.

Cooled rear seats - no data

It is a ventilation system that allows you to manually change the temperature of the rear seats. This device is a set of fans, hidden inside the seat, used to recirculate the air.

Fold flat front passenger seat - no data

This is a feature when the passenger seat folds forward 90 degrees to form a flat surface, like a table. Flat-folding versions usually have a large plastic panel on the back of the seat.

Determining 2007 Audi RS 4 maximum seating capacity

The seating capacity of your respective 2007 Audi RS 4 is the overall quantity of travelers it can have, considering the driver. Usually, several people can sit down inside a sedan auto easily: two on the front and 2 – on the back row. Even though, the backseat is designed for three passengers, the cushion at the center satisfies little men and women at most. But is it ok to drive when adults or youngsters sit on other passengers' laps inside 2007 Audi RS 4?

You must recognize that the number of security belts is influenced by the amount of passengers that can legally stay inside a automobile. And in accordance with the US laws and regulations, each traveler must be buckled up when moving in the vehicle or else, you can aquire a ticket. It is also required that all seat bealts to be useable, like some states, you can also have a higher fine for malfunctioning straps – in order to avoid bogus claims. For instance, you don't fix your 2007 Audi RS 4 belt simply because you are reluctant to do that, and suddenly a cop halts you. You say you happen to be not buckled since the belt is not functioning properly – prepare yourself to get fined.

LEGAL NOTICE

Legally, a Audi RS 4 with five seat belts can only hold five passengers

Audi RS 4 of another year

Select the year